Indoor Air Quality Assessment in the Office of the Transformer Manufacturing Factory in Selangor, Malaysia

@#Introduction: As humans spend 90% of their time inside, indoor air quality (IAQ) is critical for occupant health. The primary concern associated with low IAQ is its impact on employees’ health, comfort, and productivity. In accordance with the Industry Code of Practice on Indoor Air Quality 2010 (ICOP IAQ 2010), a ten-parameter assessment was conducted in the office of the transformer manufacturing factory in Selangor, Malaysia. Methods: The measured parameters are temperature, air movement, relative humidity, carbon dioxide (CO2 ), carbon monoxide (CO), formaldehyde (CH2 O), particulate matter (PM10), total volatile organic compounds (TVOCs), total fungal count (TFC), and total bacterial count (TBC). This study employed both qualitative and quantitative approaches by distributing questionnaires (N = 42), and measuring the indoor air quality parameters with integrated equipment at selected stations and comparing them to the ICOP IAQ 2010 standard. Results: A majority of the measures, with the exception of air movement, CO2 , and TBC, complied with the ICOP IAQ 2010 standards. The one-way ANOVA test showed that there were significant differences (p < 0.05) for the parameters of temperature, PM10, and TVOCs. The ChiSquare test revealed that sleepiness was a symptom of the sick building syndrome, affecting both male and female employees the most frequently and significantly. Conclusion: Air movement, CO2 , and TBC values that did not meet ICOP IAQ 2010 requirements revealed poor IAQ at the study site, which could have a negative influence on the employees’ health. To cut down on air pollution, the improvement on the ventilation system should be done to reduce the risks to the employees’ health.

Effect of Paint Exposure Among Paint Workers and DNA Damage: A Scoping Review

@#Paint contains various complex chemical mixtures, such as aliphatic hydrocarbons, aromatic hydrocarbons (primarily toluene), ketones, and benzene as reported at previous studies. Toxicity from some chemicals can cause early DNA damage with various factors. A scoping review was conducted via literature review on relevant studies on the effect of paint exposure on paint workers and DNA damage. A systematic search was conducted in October 2021 via PubMed, Scopus, and Web of Science databases. The key terms used were paint, solvent-based paint, organic solvent, mixed organic solvent, occupational exposure and DNA damage, oxidative stress, genotoxicity on a painter, paint worker. From 561 articles, only 13 articles were finally selected based on the inclusion, exclusion criteria, and eligibility criteria. The literature showed that biomonitoring studies on painters were consistently reporting positive and significant DNA damage due to exposure to different types of compounds mixed in a paint. However, there were fewer studies on paint manufacturing factory workers compared to painters while paint manufacturing workers exposed various chemical everyday during the paint production which potentially susceptible to occupational toxicity. In conclusion, this review suggests that exposure to paints could induce early DNA damage among paint workers and further investigations on paint exposure among paint manufacturing factory workers and the DNA damage were needed in order to improve occupational health among paint workers in the future.

Indoor Air Quality Level at Medical Clinics, University Hospital in Klang Valley, Malaysia

@#Introduction: Patient health can be influenced by indoor air quality (IAQ) level, where the risks of IAQ pollution are proportionate with the occupant number in the clinic. This research aims to determine the level of IAQ in Medical Clinic 1 and 2 of University Hospital in Klang Valley, Malaysia. Methods: The indoor exposure to physical (temperature, relative humidity and air movement), chemical (formaldehyde, CO2 , CO, TVOC and PM10) and biological (bacterial and fungal count) parameters following Industry Code of Practice (ICOP) IAQ (2010) were assessed in the morning and afternoon using relevant equipment. Data was analysed with One-Sample T Test and Independent T Test using SPSS Version 25. Results: No statistically significant mean difference (p>0.05) of IAQ parameters between both Medical Clinics (morning & afternoon) except for Rh and CO by Independent T Test analysis. In contrast, the One-Sample T Test showed there was statistically significant mean difference (p<0.01) of all parameters as compared to the ICOP (2010) standard in both Medical Clinics (morning and afternoon). There was a positive correlation of CO2 , CO and formaldehyde with bacterial counts (TBC) for both Medical Clinics. Meanwhile, CH2 O concentration was slightly higher in the morning due to the usage of cleaning products which may have released CH2 O gas killing the bacteria, thus lower the rate of bacterial growth in the afternoon. Fungal counts showed no significant impact. Conclusion: All measured parameters were complied with the ICOP (2010) standard except air movement and CO2 in both Medical Clinics.

Assessment Of Lung Function Status Of Workers At A Transformer Manufacturing Plant In Selangor, Malaysia

@#Transformer manufacturing industry uses volatile organic compounds (VOCs) containing materials such as varnish which can cause adverse health effects to human. Exposure to a high level of VOCs could disrupt the normal functions of a human lung.Therefore, this study was conducted to evaluate the status of lung functions of the workers exposed to VOCs at a transformer manufacturing plant in Selangor. The volatile organic compounds (VOCs) concentration in the office and production area was measured using direct-reading method and 60 subjects were selected to undergo the lung function test. The FVC and FEV1 values showed significant difference (p<0.05) between the exposed group and the non-exposed group. The mean readings of FVC (69.07±12.58) and FEV₁ (72.90±10.46) of the exposed groups were lower than the non-exposed group, which were 81.47±9.78 and 84.23±9.07, respectively. In contrast to the FEV1/FVC parameters, the non-exposed group (102.93 ± 7.17) showed lower mean values than the exposed group (105.90±8.98). Besides that, the nasal symptoms showed significant differences (p<0.05) between the exposed and non-exposed group. The demographic data of the exposed group showed no association with the lung function status of the exposed group workers. However, the lung functions of the exposed group were influenced by the concentration of VOCs in the production area. High concentration of VOCs may cause detrimental effects on the lung functions. Therefore, management or employers in the industry should always be aware of the effects of VOCs, and take appropriate steps to ensure the safety and welfare of the employees.

Occupational Risk Factors for Carpal Tunnel Syndrome among Nurses in Medical

Carpal tunnel syndrome (CTS) is a hand disorder which indicates the presence of symptoms such as pain, numbness, and muscle weakness among the patient. CTS is an occupational related disorder which can occur in any profession. However, it can be prevented and managed. The aims of the research were to determine the prevalence of acquiring CTS among nurses who worked in the wards and occupational risk factors involving the upper limbs during nursing tasks performance. The specific aims were to determine the relationship between the prevalence of acquiring CTS and individual factors (age, gender, race, educational level, duration of work and medical history), relationship between the prevalence of acquiring CTS and occupational risk factors in nursing tasks. Nurses profession was chosen as they are performing multitask involving upper limbs especially the wrist joints. Boston Carpal Tunnel Syndrome Questionnaire (BCTQ) was used to determine the level of severity in CTS. Occupational risk factors were assessed by using the Rapid Upper Limb Assessment (RULA). This research was a cross sectional mode which was carried out at a government university medical centre from November through December 2010. Eighty nurses were involved in the research. The respondents were required to fill in the socio-demographic information sheet. Those having CTS were required to fill in the BCTQ. Assessments were performed by observing of the job activity through RULA. The results showed that the prevalence for nurses acquiring CTS is 7.5%. The RULA assessment also indicated that the risk factor was in the highest level with a score of 7. No relationship was shown between the prevalence of CTS and race, gender, educational level and medical history. Significant relationship was indicated by the prevalence of CTS and occupational risk factors. In conclusion, a significant prevalence of CTS related to age of more than 30 years old, Malay races compared to Indian, working experience of more than 10 years and respondents with right hand dominant. Occupational risk factors also indicated among the active nurses. Therefore, it is important for us to modify the work environment, work flow, work methodology and ergonomic factors in order to prevent the nurses from acquiring CTS. Furthermore, education about the condition of CTS should be implemented and reinforced especially among the higher risk nurses.